Components for Oil and gas applications


High Pressure, High TEMPERATURE

Not only the tubing material has to resist the harsh conditions in the oil and gas indutry. The components are also subject to these loads. Evonik offers three materials for components - polyamide 12, Polyether ether ketone (PEEK) and polyimide. PEEK is mostly used. 

Komponenten Öl und Gas
VESTAKEEP® PEEK - Top Performance at High Pressure aND High TEMPERATURE

Subsea oil sources are moving further down and the digging holes in deep sea levels will add more thermal stress to sealing materials. VESTAKEEP® PEEK polymers, particulary the grades of the VESTAKEEP® 5000 series, show the needed combination of mechanical toughness and relaxation to alternating pressure. These grades are based on a polymer with an especially high molecular weight, that features an excellent property combination:

  • Superior toughness, ductility and fatigue performance

  • Excellent chemical and wear resistance

  • Excellent long term performance under HPHT and sour gas conditions 

  • Flame retardant, low smoke and toxicity

  • Easy to process and machine parts

The ductile nature VESTAKEEP® PEEK offers the right performance combination for back-up rings and seals in a seal pack application. In such applications the elastic recovery of VESTAKEEP® PEEK leads to a perfect seal with no leakage. By comparison, competition PEEK’s elastic recovery is much lower due to permanent plastic deformation normally associated with a less ductile material. VESTAKEEP® PEEK grades, thus offer exceptional performance under severe conditions  
such as chemicals (sour gas), high pressure, high temperature (HPHT), dynamic loads and complex assemblies.

Komponenten Öl und Gas

VESTAKEEP® PEEK offers superior ductility, crack resistance, toughness, low temperature Impact and higher mechanical performance at elevated temperatures than competitive PEEK grades.


Nishant Negandhi