VESTAMID® FoR high Performance cables
Protection and Safety
Plastics of Evonik used in sheathing or in cable protection tubing have protected cables for years. Continuous improvements let them always be the material of choice for the electronics and cable industry.
Polyamide 12-based VESTAMID® compounds have been used for years in copper core insulation, cable sheathing, cable conduits and plastic optical fiber sheaths.
With VESTAMID® DS, Evonik has now extended its range of high-performance compounds for cables to include a semicrystalline and 100% bio-based polyamide of high mechanical strength and resistance to chemicals and stress cracking.
Materials for the above applications must satisfy the following requirements:
high melt strength
low linear expansion coefficient
high elastic modulus and good flex cracking resistance
resistance to stress cracking by cable filling compounds and solvents such as alcohols and ketones that are used in splicing
low water absorption
good resistance to hydrolysis
high compressive strength
VESTAMID® polyamide compounds set themselves apart from the rest because of their
very high mechanical strength
outstanding chemical resistance
low sliding friction
excellent abrasion resistance
outstanding weathering stability
consistent property profile over a wide temperature range
VESTAMID® cable sheathing as protection against rodents and termites
VESTAMID® L2170 is a PA 12 grade with high viscosity and excellent weathering resistance. Telecommunications companies in Australia, India, Brazil, and Thailand have been using this material for underground cables for many years. The VESTAMID® L2170 sheath protects the cable from damage caused by rodents and termites.
Halogen-free and phosphorus-free flame-retardant VESTAMID®
VESTAMID® L1670 is a low-viscosity and weathering-stable polyamide 12 compound that can be extruded with very high draw-off speeds to give very thin copper-wire insulation.
For copper core insulation as well, we offer a range of flame-retardant compounds with halogen-free and phosphorus-free flame retardants. In case of a fire, these VESTAMID® compounds emit only small amounts of smoke.
VESTAMID® X7166, a halogen-free and phosphorus-free self-extinguishing PA 12 compound with flammability V-0 for thickness 0.8 mm under UL 94 and an LOI (Limiting Oxygen Index) greater than 32% is optimized for thin wire insulation.
VESTAMID® LX9104 is a halogen-free and phosphorus-free, flame-retardant, flexible PA 12 compound with flammability V-0 for thickness 0.8 mm under UL 94 and an LOI of 28%. Because of its excellent impact resistance, the material is used for, for example, corrugated pipes and cable conduits subjected to high dynamic loads over a wide temperature window.
Cable protection tubing meets standard for rail vehicles
Beginning in April 2016, more stringent requirements have been defined in the new EN 45545 fire protection standard to improve the overall safety of the equipment against the fire behavior of materials and components used in rail vehicles. VESTAMID® LX9115 meets the stringent EN 45545 standard, is flame retardant and features low values for toxicity and smoke. In addition VESTAMID®LX9115 possesses excellent resistance against dynamic stress and impact even in the lower temperature range. The black colored compound opens up new design possibilities for cables and cable conduits applied in sensitive interior as well as exterior applications; the coloration does not affect the outstanding fire protection properties.
In addition to rail applications, VESTAMID® LX9115 may be used in any other areas requiring a high degree of fire protection.
Polymer optical fibers (POFs)
For polymer optical fibers (POFs), Evonik has developed a VESTAMID® two-layer sheathing system for protection of the PMMA optical data medium. The first (black) layer consists of a polyamide 12 (VESTAMID®L1604) layer optimized for bonding to a PMMA core. In addition to providing mechanical protection, it increases the refractive index by virtue of its color, so that scattering of light is avoided and optical transmission improved. Optical plug-in connectors can also be attached by laser welding.
The outer layer consists of the halogen-free and phosphorus-free flame-retardant compound VESTAMID® LX9057. This gives the system good resistance to aging, chemicals, and hydrolysis as well as excellent flame retardant properties. Because it does not adhere to the inner VESTAMID® L1604 layer, it is easy to thermoform.